|
|
Banshee Crankshafts
Cranks from +5mm to +10mm are forged cranks made by Crank Works. The cranks in sizes +10mm to +20mm are Crank Works manufactured with billet crank webs. These larger strokes produce much more power and demand a stronger crank, hence the use of a billet crank. These cranks are available with any rod length, and 72mm "big" bearings are also an option. All cranks come trued, welded, and balance.
*Note: Geisick Performance also recommends the use of TZ bearings on all high performance engines. Any crank larger then +4mm stroke requires case trenching, or modification. To insure proper balancing for your specific application indicate the size of pistons you are using when ordering the crank.
|
The cranks we offer for the stock to +4mm stroke sizes are Hot Rod cranks. These have been a proven and reliable crank for many years. They are available in stock replacement with standard rods, or long rods. Hot Rods also offer a +4mm crank (with either standard or +5mm rod lengths) which will fit into a banshee crank case with out any modification. 